Ageing Panels

System Features / Technical Data:

• 3 phase-neutral operated, combined type, suitable to age HPMV lamps, HPSV lamps and MH lamps
• Provision to age lamps on both sides of the rack alternatively using common chokes and SIP ignition through special rotary switches
• Specially wound and impedance matched magnetic chokes with low watt loss which are fitted in the bottom with proper ventilation and exhaust fan for cooling
• Special rotary selector switches to select required wattage chokes while testing in common holders
• Voltmeters, ammeters, timer along with contactors and other necessary controls and switch gears
• Individual lamp circuit with provision to measure ARC voltage of each lamp
• Isolation transformer and additional circuitry to perform Extinguish test by reducing the supply voltage from 100% to 90% within 0.5 seconds without breaking the supply line
• After 5 seconds of extinguish test the supply of returns to the normal 100% value with an audio and visual indication
• Special, pushing type holders made of brass/ aluminium for easy loading and unloading of lamps
• Sets of E-27 and E-40 special holders which are common for different wattage of HID lamps
• Fully covered lamp mounting area with sliding doors or heat resistant screen on both the sides
• Lamp fixing channels can be rotated so that lamps can be Aged either horizontally or vertically as required
• Heat resistant FRP wires for entire wiring in the ageing rack
• Digital timer to be set the Ageing time totalizer (hour meter), to note the total duration of lamp burning and event counter to record the total No. of ageing cycles
• High frequency tesla coil to light up the lamps if required
• The panel/ system can be designed for the Ageing of any number of lamps as per the requirements
• The unit is supplied along with auto transformer to set the required choke voltage.